-40%
MTH SMALL FAN DRIVEN SMOKE UNIT FROM SMOKING TANK CAR SVC CTR REPLACEMENT AC-DC
$ 34.31
- Description
- Size Guide
Description
SMALL SIZE MTH FAN DRIVEN SMOKE UNITACTUAL REPLACEMENT FOR THE SMOKING TANK CAR
2 PARTS . FAN AND HEATER UNIT , PC BOARD
IT IS ABLE TO WORK WITH AC or DC VOLTAGE
APPROX. SIZES
FAN /HEATER UNIT 15/16 HIGH , 11/16 WIDE, 1 3/16 LONG
PC MEASURES 1 1/4 X 1 1/4 X 5/8 HIGH
THE SMALL SIZE MIGHT ALLOW FOR INSTALLATION IN SOME HO ENGINES and S SCALE ENGINES
GREAT FOR SMOKING CABOOSES , HOUSES , OR ANY ENGINE WHERE SPACE IS CRITICAL
LET YOUR IMAGINATION RUN WILD
NOTE SPACE SHOULD BE ALLOWED AROUND THE HEATER UNIT BECAUSE OF HEAT
BUILD UP. TAKE CARE IF TRYING TO MOUNT IN A PLASTIC BOILER. REFLECTIVE ALUMINUM TAPE CAN BE USED AS A HEAT REFLECTOR
EASY HOOK UP
THE WHITE PLUG IS FOR POWER IN .
THE 2 LONG WIRES GO TO THE FAN MOTOR WITH THE RED WIRE NEAR THE WHITE DOT ON THE MOTOR
THE 2 SHORT WIRES GO TO THE HEATER UNIT WITH THE BLACK WIRE NEAREST THE FAN UNIT
THERE ARE 2 SMALL MOUNTING HOLES IN THE HEATER UNIT TO ATTACH IT TO A CUSTOMIZED BRACKET
THE PC BOARD HAS A VOLTAGE REGULATOR THAT CAN BE SCREWED TO A HEAT SINK IF POSSIBLE. WIRES CAN BE EXTENDED FOR CERTAIN INSTALLATIONS AS NEEDED
SOLDERING OF WIRE CONNECTIONS BETWEEN THE 2 UNITS IS REQUIRED
AN ON/OFF SWITCH CAN BE ADDED ( NOT INCLUDED )